基于目前单、双面组件的价差,在组件背面不受遮挡时,双面组件背面受光对发电量提升明显,此外,双面组件双玻的封装结构具有更好的抗环境侵蚀能力,如水汽、盐雾等。而在山地、分布式平铺安装时,选择单面组件更合适
光伏发电是将光能通过半导体的特性直接转化为直流电能的,再通过逆变器将直流电转换成可以被我们使用的交流电。光伏组件本身在发电时并不产生任何电磁辐射,但是为了将光伏组件所发的直流电转变为交流电并实现和电网的连接,通常需要很多的电力设备和电子器件,这些设备在运行时会影响周围的电磁环境。 经科学测定,光伏电站的电磁环境低于各项指标的限值。在工频段,光伏电站电磁环境甚至低于正常使用的常用家用电器产生的量值,不会对人身健康产生影响。
建议:(1)定期检查组件表面洁净度情况(1 次/月)、定期用清水清洗,清洗时注意组件表面清洁干净,避免残留脏污遮挡导致组件热斑,清洗时间为早晚无太阳光照时间;(2)尽量保证组件的东边、东南边、南边、西南边、西边等方位无高出组件的杂草、树木、建筑物,对于高出组件部分的杂草、树木及时进行修剪,避免遮挡影响组件发电量
山地地形主要特点是存在不同朝向的坡,且坡度变化较大,甚至部分区域存在较深的沟壑或山丘,因此,支撑系统的设计应尽量“化整为零”及“变刚为柔”,以提高复杂地形的适应性, 1、变长支架为短支架; 2、使用更具地形适应性的支架形式:单排桩支架且立柱高差可调节、单桩固定支架或仰角可调式跟踪支架; 3、可克服柱间崎岖不平的大跨度预应力索支架。
山地光伏对地形、朝向有一定的要求,总的来说最好是选择平地、南坡(坡度小于35度)地块,如果正南方坡度大于35度,施工困难但发电量高、阵列间距小、用地面积也小,可考虑征用。 其次是东南坡、西南坡、东坡、西坡(坡度小于20度),此朝向阵列间距要稍大,用地面积大,但只要坡度不是很大可以考虑。 最后是北坡背阴,日照时间短,发电量小,阵列间距很大,尽量少用此类地块,如果必须要用此类地块最好是选择坡度在10度以内的场地。
754057886
分享到微博